You will have a lot of corrections strokes and the drag will slow you down. The problem is that you have a lot of drag on that side of the kayak. The transducer is mounted on PVC and can be mounted so the transducer is in the water off the side of the kayak. Over the Side of the Kayak Transducer Mount. If you have bubbles it can be some work to get the glue off and try again. You won't know if it works until it is dry. Pray the tape doesn't fail before it has time to set. You will then have to tape the transducer down firmly until the glue hardens. You still need to make sure there are no air bubbles which is hard to do when working with a tube of glue. You simply put marine glue on the kayak hull where you want the transducer to go. ![]() Gluing the transducer directly to the kayak using marine glue. But this will give you an idea of what is out there and any potential problems that exist. I am sure that some people have figured out ways around the problems and are using one of these methods just fine. Some work well but come with their own set of problems. Problems with Other Methods of Mounting the TransducerĪre a number of ways kayakers have mounted fish finder transducers. I then tried the above method and it has worked flawlessly. Years ago I actually tried the water method first and it didn't work at all. There is no need to add water inside the trough made when you curled the edges around the transducer.You can curl the edges of the putty to add a little protection to the transducer if you like. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |